Codan 9480 - Page 105

Programming channels
9480 HF SSB transceiver 7-5
Step Action… Display shows… Remarks…
4.
Press
Enter
Pressing the Enter button
scrolls through the
available options.
If this is the option you
want, go to step 6.
5.
Press
Enter
If this is the option you
want, go to step 6.
6.
Press
On/Off
No display. The transceiver is now
switched off.
7.
Remove the
inhibit link you
inserted across the
number 2 pads on
the
microprocessor
PCB.
Refer to Section 8,
Inserting the
microprocessor link.
8.
Return the front
panel link to its
original position.
Refer to Section 8,
Changing the position of
the front panel link.
9.
Replace the cover
before switching
on your
transceiver.
q