Overview
Error! Main Document Only.-2 9480 HF SSB transceiver
Channels
Your transceiver has a capacity of 15 channels, these cover:
• transmit frequency range 2 MHz to 24 MHz
• receive frequency range 0.25 MHz to 30 MHz.
15 transmit and receive channels are pre-programmed in the
factory. You, as a user, can also program the channels from
the front panel.
Selective call
This facility allows you to transmit a call to a single
transceiver or a group of transceivers.
Your transceiver can store details of up to ten stations that
have called you while your transceiver was left unattended.
Scanning
This facility scans selected channels for audio signals. You
can program a maximum of 15 channels to be scanned in
sequence for audio signals. When a selective call decode is
selected, a maximum of eight selective channels can be
scanned.
q
To Next Page
Loading...
