Using the receiver in scan mode
9480 HF SSB transceiver 6-3
Step Action… Display shows… Remarks…
4.
Press
Scan
Pressing the Scan
button again
returns you to the
display in step 1.
Switches from inhibit
(inhib) to enable.
Note: If you select automatic scanning, you have the option of selecting
Selective Call Mute to be enabled as soon as you enter the automatic scan
mode. If you wish to select this option, go to step 5. If you do
not wish to select this option, go to step 6.
5.
Press
Mute
Voice
S’Call
The display does not
change.
The S’Call indicator is
lit.
You have now selected
selective call mute to be
enabled as soon as you
enter the automatic scan
mode.
6.
Press
On/Off
No display. Your selection has been
made and the transceiver
is now switched off.
q
To Next Page
Loading...
Need help?
General
