Codan NGT 2010 RF - LED indications on the NGT; Table 8: Status of LED and its meaning

High power—Technical description
226 NGT Transceiver System Technical Service Manual
LED indications on the NGT
The LED on the front of the RF unit indicates the operating status of the NGT when it
is connected to a high-power system.
Table 8: Status of LED and its meaning
LED status Meaning
Steady green Device is functioning correctly
Slow flashing green Device is establishing communication with the NGT
Steady yellow Device is being reset
Slow flashing red Device has been requested to perform a command that is not
available
Steady red Device has a non-recoverable configuration error