NGT—Channel additions
NGT Transceiver System Technical Service Manual 139
The new channel is created and the List Manager remains open.
If you want to view the channel you have created, close the List Manager by
pressing .
1 Press until Main Menu is displayed.
Renaming a channel
When you rename a channel, references to the channel in other lists are not automatically
updated; you need to go to the Address, Network and Phone Link Lists and update any
references to the channel.
For example, if the channel you renamed is used in a network, go to the channel/mode
list for the network, find the reference to the old channel name, then edit it so that the
new name is displayed. If you do not update the reference to the channel, the channel is
not scanned when scanning is switched on.
To rename a channel:
1 Press until Main Menu is displayed.
1 Select Channel.
1 Go to the entry you want to rename. For example:
1 Hold to open the List Manager.
NOTE
If you disabled the transmit frequency, dashes are displayed at the
bottom left of the channel screen.
NOTE Use or to scroll to the entry, or use the Find feature.
To Next Page
Loading...
Need help?
General
