Codan NGT 2010 RF User Manual

NRI—Brief description
262 NGT Transceiver System Technical Service Manual
Remote control junction box
The RCJB can be configured to operate as one of the following:
• a modem adaptor
• an additional system connection point for the RTU–282/292
Modem adaptor
The modem adaptor is a remote control junction box that is used to connect an HF Data
Modem 3012 into an NGT data system. The modem adaptor has been configured to act
as a CIB interface for the 3012 at the transceiver site. It provides a connection for the
transfer of serial data between the PC at the control site and the 3012 at the transceiver
site. The modem adaptor also provides a 15-way port for system audio and control lines
to and from the 3012.

Codan NGT 2010 RF Specifications

General

Brand	Codan
Model	NGT 2010 RF
Category	Transceiver
Language	English