Web interface – Customization Control Station Duetto
64 2.0/0518
Element Properties
Button type
Select the desired button in the virtual screen preview.
In the drop-down list, select desired Button type.
The following functions are available for button elements:
Function Description
Display only
Shows the text entered in the field Text or the image uploaded via the button Upload
image with the selected background colour.
HTTP request
Triggers controls in a third-party system (e.g. relay controlling of a WS SIP station,
switching the light in a KNX system). In the field Link, enter the desired link address
(e.g. http://www.example.com).
Phone call
Initiates a call from the DUETTO device to a SIP subscriber. In the field Phone num-
ber or SIP URI, enter either the SIP call number or URI.
(e.g. sip:user@example.com).
Intercom call
Initiates a call from the DUETTO device to an Intercom subscriber. In the field Call
number, enter the desired call number.
Commend Direct
Dialing (only Intercom)
Performs functions via virtual direct dialling modules (e.g. templates, direct dialling,
control of outputs). DUETTO simulates up to 4 direct dialling modules with 12 direct
dialling buttons each. The modules will be registered automatically in CCT 800 as
soon as the Intercom Server has received the respective CCT 800 configuration. In the
drop-down list Module/Key, select the desired module and direct dialling button.
NOTE: As of DUETTO version 1.6 in combination with CCT 800 as of version 7.1, it is
possible to use up to 8 direct dialling modules with 12 direct dialling buttons each. For
further information about the configuration of direct dialling modules, see manual
“Intercom Server Configuration”.
Switch to...
Switches the current view to the application that has been selected in the drop-down
list Application.
Switch to screen
Switches the current view to the screen that has been selected in the drop-down list
Screen (see page 111).
Call handling
Accept and/or cancel a call or use door opener. In the drop-down list Service, select
the desired service in which an action will be carried out by tapping on the desired
button that can be selected from the drop-down list Actions.
Logic tag
Connect elements (buttons or logic rules). For example, a button click can be used as a
trigger ("Event") of a "Logic Rule". Conversely, "Logic Rules" can execute "Actions"
that change the behaviour of buttons. In both examples, the mapping is carried out
with the help of logic tags. It is possible to define multiple logic tags per DUETTO
device.
Further information about logic tags can be found on page 71.
In the web interface, the icon is shown for this button element in the virtual screen
preview and for easier identification also in the respective screen at CUSTOMIZA-
TION > SCREENS. For an example, see page 144.
To Next Page
Loading...
