Control Station Duetto Web interface – Customization
2.0/0518 73
Commend direct dialling
(Intercom only)
Performs functions via virtual direct dialling modules (e.g. templates, direct
dialling, control of outputs). DUETTO simulates up to 4 direct dialling mod-
ules with 12 direct dialling buttons each. The modules will automatically be
registered in CCT 800 as soon as the respective CCT 800 configuration is
received from the Intercom Server. In the drop-down list Module/Key,
select the desired module and key.
NOTE: As of DUETTO version 1.6 in combination with CCT 800 as of version
7.1 it is possible to use up to 8 direct dialling modules with 12 direct dialling
buttons each. For further information about the configuration of direct dial-
ling modules, see manual “Intercom Server Configuration”.
Send ICX message (Inter-
com only)
Sends an ICX message to the connected devices.
Note: No validation of the ICX message takes place! For further information
about ICX messages, see manual “ICX protocol”
.
Open intercom door (Inter-
com only)
Sends a signal to open a door. In the field „Open door from origin“ the per-
mission to open a door can be defined.
NOTE: It is recommend not to use this action with logic tag buttons.
Toggle intercom privacy
mode (Intercom only)
Toggles the intercom privacy mode on the DUETTO device (see ”Example 2:
Configuration of a DND button or Privacy Mode button” on page 146.
To Next Page
Loading...
