Web interface – Customization Control Station Duetto
74 2.0/0518
Action > Tags Function
Apply button visual
feedback
Changes the label, background colour,
blinking behaviour
(i.e. whether but-
ton blinks or not) and/or background image of all buttons in custom screens
to which the logic tag entered in the field
Tag name
. The following settings
are available:
Tag name: In this field, enter logic tag name to change the settings of all
button to which the same logic tag has been assigned. Further information
about logic tags can be found on page 71
.
Use predefined button visual feedback: Activate this checkbox in order
to use a range of predefined settings for feedback (background colour,
blinking colour, and icon) based on different states. By default, this option
is available for the event “Phone DND toggled” and its corresponding 2
states: active, inactive, “Intercom privacy toggled” and “Audio device dur-
ing call toggled”.
Text: In this field, the label to be displayed on the button can be entered.
Background colour: In this drop-down list, the button background colour
can be selected.
Blinking: In this drop-down list, the button blinking behaviour can be se-
lected (fast or slow).
Remove: Click on this button to remove the currently selected image or
icon.
Upload: Click on this button to upload an image or an icon. After the file
has been uploaded, a text with the file name and its extension will be dis-
played. File size: max. 100 kB, supported file formats: PNG, JPEG, GIF and
SVG.
Icons: Click on this button to select an icon from a predefined icon list. It
is possible to upload custom icons for single buttons (see above).
NOTES:
By selecting the event “Phone DND toggled”, the settings above can be
configured for both active and inactive DND mode.
In the web interface, this logic rule will be shown when the corresponding
tag name has been triggered. For easier identification the icon is shown.
For an example, see page 144.
In order to save the logic rule, a valid logic tag name must be entered.
Trigger logic tag
Triggers all events “Logic tag triggered” on the DUETTO device to which the
same logic tag has been assigned. Further information about logic tags can
be found
on page 71.
NOTES:
In the web interface, the icon is shown for easier identification. For an ex-
ample, see page 144.
In order to save the logic rule, a valid logic tag name must be entered.
Action > Others Function
Switch to APP
Switches the view to the app that is selected in the drop-down list App.
Switch to screen
Switches the view to the screen that is selected in the drop-down list
Screen. For further information about the configuration of a screen see
page 93.
Digital output
Carries out the selected action in the drop-down list State at the selected
digital output of the DUETTO device or add-on output (if connected) in the
drop-down list Output.
NOTE: Further information about the digital and add-on outputs can be
found on page 49 and about the configuration of door opener on page 124.
Playback soundfile
Playback of an audio file up to 10 times. In the drop-down lists, select the
desired audio file, which can be uploaded in the web interface at
Device >
Audio
(
see page 41
), and the number of consecutive playbacks.
Toggle audio device during
call
Toggles the audio device during a call.
To Next Page
Loading...
