D-Link xStack DGS-3120 Series Reference Guide

xStack® DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch Web UI Reference Guide
481
through Web authenticated by
AAA server
Web from <userIP> authenticated by
AAA server <serverIP> (Username:
<username> )
Enable Admin failed through
Web authenticated by AAA
server
Enable Admin failed through Web
from <userIP> authenticated by AAA
server <serverIP> (Username:
<username> )
Warning
Enable Admin failed through
Web due to AAA server
timeout or improper
configuration
Enable Admin failed through Web
from <userIP> due to AAA server
timeout or improper configuration
(Username: <username>)
Warning
Successful Enable Admin
through Web(SSL)
authenticated by AAA server
Successful Enable Admin through
Web(SSL) from <userIP>
authenticated by AAA server
<serverIP> (Username:
<username> )
Informational
Enable Admin failed through
Web(SSL) authenticated by
AAA server
Enable Admin failed through
Web(SSL) from <userIP>
authenticated by AAA server
<serverIP> (Username:
<username> )
Warning
Enable Admin failed through
Web(SSL) due to AAA server
timeout or improper
configuration
Enable Admin failed through
Web(SSL) from <userIP> due to AAA
server timeout or improper
configuration (Username:
<username>)
Warning
Successful Enable Admin
through Telnet authenticated
by AAA server
Successful Enable Admin through
Telnet from <userIP> authenticated
by AAA server <serverIP>
(Username: <username>)
Informational
Enable Admin failed through
Telnet authenticated by AAA
server
Enable Admin failed through Telnet
from <userIP> authenticated by AAA
server <serverIP> (Username:
<username> )
Warning
Enable Admin failed through
Telnet due to AAA server
timeout or improper
configuration
Enable Admin failed through Telnet
from <userIP> due to AAA server
timeout or improper configuration
(Username: <username>)
Warning
Successful Enable Admin
through SSH authenticated by
AAA server
Successful Enable Admin through
SSH from <userIP> authenticated by
AAA server <serverIP> (Username:
<username> )
Informational
Enable Admin failed through
SSH authenticated by AAA
server
Enable Admin failed through SSH
from <userIP> authenticated by AAA
server <serverIP> (Username:
<username> )
Warning
Enable Admin failed through
SSH due to AAA server
timeout or improper
configuration
Enable Admin failed through SSH
from <userIP> due to AAA server
timeout or improper configuration
(Username: <username> )
Warning
Port Security
port security is exceeded to its
maximum learning size and
will not learn any new address
Port security violation (MAC address:
<macaddr> on port:
<[unitID:]portNum>)
Warning
RADIUS
VID assigned from RADIUS
server after RADIUS client is
authenticated by RADIUS
server successfully .This VID
will be assigned to the port
and this port will be the VLAN
untagged port member.
RADIUS server <ipaddr> assigned
VID :<vlanID> to port
<[unitID:]portNum>
(account :<username> )
Informational
Ingress bandwidth assigned
from RADIUS server after
RADIUS client is
authenticated by RADIUS
server successfully .This
Ingress bandwidth will be
assigned to the port.
RADIUS server <ipaddr> assigned
ingress
bandwith :<ingressBandwidth> to port
<[unitID:]portNum> (account :
<username>)
Informational
Egress bandwidth assigned
from RADIUS server after
RADIUS client is
authenticated by RADIUS
server successfully .This
egress bandwidth will be
assigned to the port.
RADIUS server <ipaddr> assigned
egress bandwith :<egressBandwidth>
to port <[unitID:]portNum> (account:
<username>)
Informational
802.1p default priority RADIUS server <ipaddr> assigned
Informational

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)