What does Braking max mean on Danfoss VLT AQUA Drive FC 202?
When 'Braking max.' is displayed on your Danfoss DC Drives, it signifies that the brake chopper is active and the power limit for the brake resistor has been reached.
What does Feedback high mean on Danfoss VLT AQUA Drive FC 202 DC Drives?
If your Danfoss DC Drives display 'Feedback high', it means that the sum of all active feedbacks exceeds the limit set in parameter 4-57 Warning Feedback High.
What does Braking mean on Danfoss VLT AQUA Drive FC 202?
The 'Braking' indicator on Danfoss DC Drives signifies that the brake chopper is currently in operation, and the brake resistor is absorbing generative energy.
Specifies requirements for personnel authorized to install, operate, and maintain the equipment.
Details critical safety warnings for operation, discharge time, high voltage, and electrical hazards.
Provides steps to identify drive enclosure size and installed options via type code.
Details the control compartment layout, door components, and Local Control Panel (LCP) functions.
Covers ambient conditions, gases, dust, and explosive atmospheres.
Highlights essential safety warnings for electrical installation procedures.
Covers best practices for EMC-compliant installation, including cable shielding and separation.
Details procedures for connecting motor, mains, ground cables, and filters.
Provides recommendations for fuse selection and ratings for IEC and UL installations.
Outlines procedures and checks before applying power, including safety warnings.
Covers parameter overview, navigation, programming examples, and system information entry.
Details procedures for testing motor rotation and encoder feedback.
Provides a recommended procedure for initial drive start-up.
Explains parameter overview, uploading/downloading, and restoring factory defaults.
Categorizes and explains various warning and alarm types, their causes, and indicators.
Offers solutions for common drive symptoms like display issues, motor problems, and power supply faults.
Details electrical specifications, power ratings, and cable requirements for all FC 202 models.
Specifies mains supply voltage, frequency, imbalance, and environment ratings.
Provides data on motor output voltage, frequency, torque characteristics, and ramp times.
Details types of fuses, disconnect switches, contactors, and MCCBs with part numbers.
To Next Page
General