Enter/Exit Programming Mode
262 QuickScan™ I QD21X1 / QM21X1 / QBT21X1
Copy Configuration to Base Station
Scan the following label to copy the current scanner configuration to the Base
Station. Use this method when the Auto Configuration Update feature is
disabled and you want a one-time configuration update to be performed on the
Base Station.
Copy Configuration to Base Station
NOTE
Do not scan an ENTER/EXIT PROGRAMMING MODE label with this barcode.
Automatic Flash Update
This feature enables/disables the automatic flash update of a reader.
Automatic Flash Update = Disable
Automatic Flash Update = Enable
To Next Page
Loading...
