Delta VP3000 Series - Page 122

Chapter 3 Electrical Wiring｜VP3000
113
Frame A2–B2 (Take Frame A1 as example shown in the following figures)
Applicable models: VFD3A0VP43BFTAA, VFD4A2VP43BFTAA, VFD5A6VP43BFTAA, VFD7A2VP43BFTAA,
VFD011VP43BFTAA, VFD013VP43BFTAA, VFD018VP43BFTAA
1. Loosen and remove the screws.
Screw torque: 8–10 kg-cm / (6.9–8.7 lb-in.) / (0.8–1.0 Nm)
Figure 3-58
2. Fasten the screws to the RFI jumper storage placement.
Screw torque: 8–10 kg-cm / (6.9–8.7 lb-in.) / (0.8–1.0 Nm)
Figure 3-59