Delta VP3000 Series - Page 417

Chapter 8 Troubleshooting｜VP3000
408
ID No.
Warning Name
Descriptions
15
Run disable
(RuDs)
When enabling Pr. A1-21, the corresponded MI terminal is OFF and receiving a
RUN command
Action and Reset
Action Condition
The corresponded MI terminal of Pr. A1-21 is OFF and receiving a RUN
command
Action Time
Immediately act
Warning Setting Parameter
N/A
Reset Method
Auto resets when the MI terminal is ON
Reset Condition
Immediately reset
Record
No
Cause
Corrective Actions
Incorrect wiring or the function
signal has not input
Check whether the wiring and upper unit function output is correct.