Delta VP3000 Series - Page 61

Chapter 2 Mechanical Installation｜VP3000
52
Frame E – Type 1
Applicable models: VFD073VP43BFTCA, VFD090VP43BFTCA, VFD073VP43BSTCA,
VFD090VP43BSTCA
1. Refer to the following table for the assembling accessories, quantities and screw torque.
No.
Accessories
Qty (pcs)
1
Control clips
3
2
Screw M4xL15 (Screw torque: 14–16 kg-cm / 12.2–13.9 lb-in. / 1.37–1.57 Nm)
6
3
Output EMC clips
1
4
Screw M4xL15 (Screw torque: 14–16 kg-cm / 12.2–13.9 lb-in. / 1.37–1.57 Nm)
2
2. Fasten the accessories as shown in the figure below.
Figure 2-71
3. Install the above EMC plate and control clips onto the AC motor drive, refer to the installation
location shown in the figure below.
Figure 2-72