To Next Page
K
Kristen BurtonSep 9, 2025
What causes an 'Abort' message on the Deprag AST40-1 Controller?
- HhpottsSep 9, 2025
An 'Abort' message on the Deprag Controller indicates that the start signal must be present until the end of the screwdriver operation.
What causes an 'Abort' message on the Deprag AST40-1 Controller?
An 'Abort' message on the Deprag Controller indicates that the start signal must be present until the end of the screwdriver operation.
How do I initialize the power unit on my Deprag cordless EC-screwdriver?
To initialize the power unit on your cordless EC-screwdriver using the Deprag Controller, recycle power to the cordless EC- screwdriver.
How to solve 'Program number larger than 100' error on Deprag AST40-1?
To solve the 'Program number larger than 100' error on the Deprag Controller, enter a program number between 1 and 100.
What to do if Deprag Controller says 'Software versions of master control unit and power unit do not match!'?
If the Deprag Controller indicates that the software versions of the master control unit and power unit do not match, please contact the DEPRAG Service Department.
What to do if the Deprag AST40-1 Controller indicates 'Power unit has stopped'?
If the Deprag Controller indicates that the power unit has stopped, please contact the DEPRAG Service Department.
Explains the meaning of DANGER, WARNING, CAUTION, NOTICE, and IMPORTANT symbols.
Essential safety warnings for operation, including electrocution risk.
Specifies the intended industrial use and limitations of the AST40 controller.
Lists the items included in the AST40 sequence controller shipment.
High-level overview of the AST40's capabilities and features.
Visual overview of the AST40 controller's front and connection sides.
Details of all interfaces including I/O, Ethernet, USB, Emergency Stop, and Fieldbus.
Technical drawing with dimensions of the AST40 unit.
Step-by-step guide for physical assembly and connecting components.
Explains basic operation and how to program screwdriving sequences.
Configuration for Profibus, Profinet, EtherNet/IP, and EtherCAT, including software imports.
Manages user accounts, passwords, and access rights for the controller.
Explains display fields, input fields, buttons, switches, and input methods.
How to navigate menus, open modules, and log in.
Viewing process data including display, statistics, and graphics.
Configuring system settings, network, fieldbus, date/time, and user management.
Creating and modifying screwdriving programs via the touch display.
Performing tests and diagnostics on tool, I/O, Fieldbus, and system status.
System requirements (hardware/software) and initial setup for web access.
How to start, log in, and understand the web interface menu structure.
Configuring system settings, network, fieldbus, date/time, and user administration.
Creating, editing, and managing screwdriving programs through the web interface.
Accessing process data, statistics, graphics, manuals, and updates through the web interface.
Configuration of IP, language, fieldbus, and other controller parameters.
Configuration and default values for the MINIMAT–EC-Servo Screwdriver.
Detailed explanation of various screwdriving methods (Torque, Angle, Friction, etc.).
Explanation of available commands like Waiting, Setting, Displaying values, Saving.
How screwdriving results and curves are stored and can be accessed.
Generating statistics and configuring print formats for screwdriving data.
General recommendations for device handling, cleaning, and safety.
Procedures for updating software for main controller, power unit, and screwdriver.
Steps to recalibrate the touch display for accurate input.
Lists system errors for screwdriver, power unit, controller, and communication.
Lists errors related to the screwdriving sequence itself.
Basic troubleshooting steps for common display and connection issues.
Lists cables, connectors, fieldbus modules, and printer interfaces.
Information on DataLogger, GRAPH10, TC30-PC Statistics software packages.
Definitions of technical terms used throughout the manual.
Procedures for safely shutting down and storing the device.
Technical specifications including dimensions, operating temperature, and voltage.
Declaration of conformity with relevant machine directives and standards.
Contact details for DEPRAG support and worldwide service locations.
General| Brand | Deprag |
|---|---|
| Model | AST40-1 |
| Category | Controller |
| Language | English |
