Manuale operativo
CHORUS
Rev. 0 del 06/2012 65
Bar positioned on a test code which is present
When the selection bar is positioned on a line which
already contains the test code and the operator wants
to manually insert a new test associated to the same
sample code:
Press the Keyb key.
fig. 65
Insert the code manually in the editing window.
To save and exit, press the OK key (to exit without
saving, press Cancel).
fig. 66
The new association sample/test is introduced in the
last available position.
The selection bar moves to the new association.
fig. 67
To Next Page
Loading...
