Dräger Infinity M300 series - Page 104

Getting started
104 Instructions for use – Infinity
®
M300 and M300+ series – VG3.0
For descriptions of the tab contents, refer to the following pages corresponding to each tab:
– Layout
See "Layout/ Parameters > Layout page" on page 216
– ECG
See "Layout/ Parameters > ECG page" on page 221
– SpO2
See "Layout/ Parameters > SpO2 page" on page 222
– ST
See "Layout/ Parameters > ST page" on page 222. Note that you cannot change the following settings
from the BedView page.
– ST units
– ST event duration [s]