Instructions for use – Infinity
®
M300 and M300+ series – VG3.0 209
System configuration
The Alarms page (telemetry)
The Telemetry defaults > Alarms page enables you to configure system default settings relating to alarm
annunciation, and change the alarm limits and arrhythmia settings for all M300 devices admitted to that
ICS.
To access the alarm setup for telemetry
1 Select the Telemetry defaults button on the Main menu bar.
2 Select the Alarms tab.
3 Select one of the following tabs to access the corresponding setup page:
– Limits
– Arrhythmia
– Device settings
Alarms > Limits page
The following diagram shows an example of the Limits tab contents from the Alarms page, where alarm
settings for all available parameters can be configured.
The page consists of a table with setup rows for each parameter. Each setup row consists of several fields
used to configure the individual alarm settings. Selecting a field causes the corresponding row to appear
highlighted.
To Next Page
Loading...
