Instructions for use – Infinity
®
M300 and M300+ series – VG3.0 295
List of accessories
– “ECG monitoring – reusable leadsets” on page 296
– “ECG monitoring – single-patient use leadsets” on page 298
– “ECG monitoring – MonoLead” on page 300
– “ECG monitoring – Telemetry” on page 302
– “Pulse Oximetry (SpO2) monitoring with Masimo” on page 304
– “Pulse Oximetry (SpO2) monitoring with Nellcor” on page 306
Each parameter section has its own diagram depicting the parameter-specific accessories. Letters in the
diagrams correspond to the letters in the tables that list the descriptions and the part numbers of the
accessories. Because some accessories are too numerous to list in the diagram, they do not have a letter
associated with them.
Part numbers are subject to change without prior notice. Use only Dräger-approved accessories,
otherwise the proper functioning of the ICS may be compromised. Contact your Dräger representative for
the most up to date part numbers.
This chapter only contains accessories for the ICS and the M300. For information about accessories for
bedside monitors, refer to the instructions for use of the specific bedside monitor.
General M300 accessories
The following table lists the system components, power cables, system cables, and keyboards for the ICS
with M300 configuration.
System components
The following parts are components of the ICS with M300 configuration. They are not available for
purchase individually. Contact your Dräger representative for additional information.
Part Part No.
Bedside Charger MS29558
Central Charger MS25699
Infinity CentralStation CPU MS26800
Infinity M300 MS25755
Tele Transm Pouch Disp. 100 pcs MS22905
Pouch M300 Waterproof New Tag MS32401
Shp Exc M300 MS26076
To Next Page
Loading...
