Instructions for use – Infinity
®
M300 and M300+ series – VG3.0 49
System overview
Overview of the Bedside Charger
The following illustration shows a Bedside Charger which is used to charge the battery of the M300. For
information on how to charge the battery, see “Using the Bedside Charger” on page 95.
Avoiding charger and adapter damage
To avoid causing damage to the Bedside Charger, the wall adapter should be grasped firmly and pulled
straight from the wall when unplugging the charger. Before grasping the wall adapter, however, ensure
that the wall adapter has not been damaged previously.
To avoid damaging the Bedside Charger, make sure that the Bedside Charger is no longer attached to
the bed before attempting to move the bed.
To avoid damaging the wall adapter, the Bedside Charger should never be unplugged by pulling on the
cord.
A Power LED – lights up green when the bedside charger is plugged in
B Power adapter (country-dependent)
C Charging pins
425
To Next Page
Loading...
