Dräger Infinity M300 series - Spo and Pulse Rate Monitoring with Nellcor and M3002; Nellcor and M300

Instructions for use – Infinity
®
M300 and M300+ series – VG3.0 181
SpO
2 and pulse rate monitoring with Nellcor and M300
SpO2 and pulse rate monitoring with Nellcor and M300
Overview of SpO2 monitoring with Nellcor . 182
Supported parameters . . . . . . . . . . . . . . . . . . . 182
SpO2 precautions . . . . . . . . . . . . . . . . . . . . . . 183
Starting SpO
2 monitoring on a patient. . . . . 184
Connecting the SpO
2 cable to the M300 . . . 185
Patient preparation for SpO
2 monitoring . . . 186
Applying the sensor . . . . . . . . . . . . . . . . . . . . . 186
Turning SpO2 monitoring on/off . . . . . . . . . . 187
SpO
2 display . . . . . . . . . . . . . . . . . . . . . . . . . . 188
SpO
2 parameter box on an ICS BedView . . . . 188
SpO
2 parameter box on an M300. . . . . . . . . . . 189
Accessing the SpO
2 setup page . . . . . . . . . . 190
SpO
2 parameter setup functions . . . . . . . . . 190