Reprocessing
260 Instructions for use – Infinity
®
M300 and M300+ series – VG3.0
Dräger states that oxygen-releasing agents and chlorine-releasing agents may cause color change in
some materials. Color change does not indicate that the product is not functioning correctly.
Other surface disinfectants are used at one's own risk.
After reprocessing
Assembling and attaching device-specific components
Prerequisite:
– All components have been reprocessed and are dry.
Assembling the M300+ battery retainer and M300+ battery
To insert the swappable battery into the M300+
1 Press the buttons on the swappable battery.
2 Align and insert the battery into place.
3 Slide the battery retainer down over the M300+ into place above the battery.
NOTE
Make sure the swappable battery correctly aligns with the M300+ before securing into place.
To Next Page
Loading...
