Dräger Infinity M300 series - Alarm Setup for Arrhythmia Parameters

Alarms
130 Instructions for use – Infinity
®
M300 and M300+ series – VG3.0
Alarm setup for arrhythmia parameters
The following diagram shows the Alarms > Arrhythmia page where you configure alarm settings for
arrhythmia parameters. This page consists of a table with setup rows for each arrhythmia parameter. Each
setup row consists of several fields for configuring the individual arrhythmia alarm settings.
A ARR mode buttons: Off, Basic, Advanced – selects the arrhythmia mode. For more information, see
page 157.
B Arrhythmia column for identifying the ARR label
C Alarm column for selecting an alarm priority
D Rate column for setting the rate
E Count column for setting the count
F Archive column
G Restore button (in the Limits defaults field for M300) for restoring the system default settings for the
M300.
H Apply button
I Undo button
470
x
A
BDE
G
H
CF
I