Dräger Infinity M300 series - Spo 2 Display; Spo 2 Parameter Box on an ICS Bedview

SpO2 and pulse rate monitoring with Nellcor and M300
188 Instructions for use – Infinity
®
M300 and M300+ series – VG3.0
SpO2 display
On the ICS and M300, the SpO2 display consists of:
– SpO2 parameter box
– SpO2 pulse plethysmogram waveform
The SpO2 parameter box displays in the following locations:
– The viewports on the ICS Main screen
– The BedView screen of a patient on the ICS
– On the M300
SpO2 parameter box on an ICS BedView
NOTE
The pulse plethysmogram waveform is directly proportional to the pulse amplitude strength.
403
A
D
EF
B C