Dräger Infinity M300 series - Infinity M300;M300+ Communications; Infinity M300;M300+ User Interfaces and Functions

System overview
44 Instructions for use – Infinity
®
M300 and M300+ series – VG3.0
Infinity M300/M300+ communications
Infinity M300/M300+ connects to the Infinity network via 802.11 wireless communication with hospital
access points (AP). From the AP, data is routed over the Infinity network via wired Ethernet for real-time
display and annunciation at the Infinity CentralStation Wide (Widescreen) central monitoring workstation.
The Infinity CentralStation (ICS) Wide allows for simultaneous central monitoring of up to thirty-two (32)
Infinity M300/M300+ devices to support wireless telemetry monitoring.
Infinity M300/M300+ user interfaces and functions
The Infinity M300/M300+ communicates bilaterally with the Infinity CentralStation (ICS) which serves as
the primary display, user interface and alarm annunciator for acquired M300/M300+ physiological patient
data. The Infinity M300/M300+ 6-button local keypad and display serves as a secondary user interface for
clinicians to access local features and functions.
At the ICS clinicians may perform the following functions:
 Admit / Discharge patients
 Initiate / Discontinue M300/M300+ Standby
 Enter patient demographics
 Assign patient categories
 Assign alarm limits
 Manage M300/M300+ audio pause, alarm pause, alarm silence
 Access patient alarm history
 Access patient full disclosure records
At the Infinity M300/M300+ clinicians may perform the following functions:
 Turn device on and off
 Adjust alarm volume
 Manage alarm pause
 Scroll through waveforms
 Discharge patients
 Initiate strip recordings
 Issue staff alerts