Instructions for use – Infinity
®
M300 and M300+ series – VG3.0 129
Alarms
– Record – generates a strip recording.
– Store/Rec. – generates a strip recording and stores the event in the disclosure database.
7 Repeat steps 3 through 6 for each parameter you want to configure.
Or, select the Auto set button in the Limits field (J), to reset the alarm limits of all the available pa-
rameters to automatically calculated values. For more information on auto setting limits, see page 132.
8 Select the Apply button.
NOTE
When the remote control feature is disabled, only the first page of the Alarm limits page is displayed.
To Next Page
Loading...
