Dräger Perseus A500 - Page 160

Configuration
160 Instructions for use Perseus A500 SW 2.0n
Vertical tab "Proced. 2"
Headline/
Parameter
Setting range
Description
Default settings for one-step recruitment
Pressure
[mbar]; [hPa];
[cmH
2O]
PEEP + 1 to
80
30
PEEP + 1 to
80
25
PEEP + 1 to
80
20
Sets the pressure level for the
maneuver.
Duration
[s]
3 to 40
30
3 to 40
15
3 to 40
5
Sets the duration of the maneuver.
Default settings for multi-step recruitment
PEEP max
[mbar]; [hPa];
[cmH
2O]
PEEP to 35
20
PEEP to 35
15
PEEP to 35
12
Sets the maximum PEEP pressure
for the maneuver.
Pinsp max
[mbar]; [hPa];
[cmH
2O]
15 to 80
35
15 to 80
30
15 to 80
25
Sets the maximum inspiratory
pressure for the maneuver.
∆Pressure
[mbar]; [hPa];
[cmH
2O]
5 to 30
10
5 to 30
10
5 to 30
10
Sets the pressure difference
between Pinsp and PEEP with
which pressure-controlled ventila-
tion is carried out.
If PEEP max or Pinsp max is
reached in the course of the
maneuver, the pressure difference
will be reduced in steps until the
other set value is also reached.
The smallest possible value must
be at least 3 above the set value
for the pressure rise for each level.
Breaths/Step 1 to 20
3
1 to 20
4
1 to 20
5
Number of breaths at a pressure
level during the increase or reduc-
tion
Breaths@Max 1 to 20
6
1 to 20
8
1 to 20
10
Number of breaths at the Pinsp
max pressure level
Pressure rise per
step
[mbar]; [hPa];
[cmH
2O]
2 to 10
5
2 to 10
4
2 to 10
3
Specifies the pressure by which
PEEP and Pinsp will be increased
in steps.
Pressure decrease
per step when
PEEP > 15
[mbar]; [hPa];
[cmH
2O]
2 to 10
5
2 to 10
4
2 to 10
3
For PEEP >15: Specifies the pres-
sure by which PEEP and Pinsp will
be reduced in steps.