11.3 Setting the sewing equipment
After the loading of the program, the control panel will display an error
message “9010" (enter the s ewing equipment).
“OK” Key Press the “OK”key.
ïðñò Keys Enter the code “2548” using the arrow keys.
“OK” Key Press the “OK”key.
The menu item 511 (sewing equipment)
will be activated.
“OK” Key Press the “OK”key.
ñò Keys Select the equipment matching to
the machine and subclass using the arrow keys
and confirm it through the “OK”key.
The main menu will then be displayed
on the control panel.
The machine is now ready for use.
CAUTION !
A wrong setting of the sewing equipment can damage
the sewing machine.
11.4 Dongle-Update via Internet
Dongles can be updated with programs available from the Dürkopp
Adler homepage. Please visit our Internet site
“www.duerkopp-adler.com” where you will find the relevant programs
in the “Download” area. Prerequisite is our auxiliary download software
“Dongle Copy” which is available in the same section together with
instructions for easy use.
2
15
To Next Page
Loading...
