8.4 Height of the fabric clamps
Caution: Danger of injury!
Switchthemainswitchoff.
Adjust the fabric clamp height only with the machine switched off.
Standard checking
The distance between the open fabric clamps 2 and 3 should amount
to 12 mm.
–
Remove the clamping plates.
–
Open the clamping plate and test e.g. with a twist drill Ø 12 mm
whether the fabric clamps 2 and 3 have the required distance.
Correction
–
Adjustthedistancewithcorepin1.
3
21
Ø12mm 3 2 1
32
To Next Page
Loading...
