24. Service menu (technician level)
In the service menu of the 559 various basic adjustments and test
programs can be executed.
24.1 Activating the service menu
–
Press the keys “P” and “F” simultaneously on the c ontrol panel.
A code query appears.
–
Enter the code “2548” with the cursor keys.
–
Press key “OK”.
The menu item “500” (configuration of the automate) appears.
24.2 Selection of a menu item/submenu item
–
Select the desired menu item with the k eys “ñ”or“ò”.
Example: 550
–
Press key “OK”.
The menu item is activated.
–
Select the desired submenu item with the k eys “ñ”or“ò”.
Example: 551
–
Press key “OK”.
The submenu item is activated.
–
Press key “ï”.
Switch back to the level before in the menu.
24.3 Multitest
The functions of the Multitest menu (input test etc.) can be reached as
described under 28.2.
However, some functions require that the motors are dead.
–
Press the keys “P” and “ï” s imultaneously on the control panel
and switch the main s witch on.
–
Select the desired submenu item with the k eys “ñ”or“ò”.
Example: 601
–
Press key “OK”.
The submenu item is activated.
24.4 Quitting the service menu
–
Press key “ESC”.
The control switches back to the main menu.
3
51
To Next Page
Loading...
