What to do if sewing motor fault (Error 1001) occurs on DURKOPP ADLER 581 Sewing Machine?
If your DURKOPP ADLER Sewing Machine displays a sewing motor fault (Error 1001), it could be due to a disconnected or defective sewing motor plug. Check the connection of the sewing motor cable. You can also test the sewing motor phases (R = 2.8 ?, high impedance to PE), replace the encoder, replace the sewing motor, or replace the control.
What to do if sewing motor fault (Error 1006) occurs on DURKOPP ADLER 581 Sewing Machine?
If the sewing motor shows a fault (Error 1006) on your DURKOPP ADLER Sewing Machine, it could be due to exceeding the maximum speed, a defective sewing motor cable, or a defective sewing motor. Try switching the machine off and on again. If that doesn't work, replace the encoder, perform a reset, or replace the sewing motor. You can also contact customer service.
What to do if sewing motor current feed fault (Error 1005) occurs on DURKOPP ADLER 581 Sewing Machine?
If the sewing motor current feed is faulty (Error 1005) on your DURKOPP ADLER Sewing Machine, it could be due to the sewing motor being blocked, a defective or disconnected encoder cable, or a defective encoder. First, remove any blockage. Then, check the encoder cable and replace it if necessary. If the problem persists, consider replacing the sewing motor.
What to do if DURKOPP ADLER Sewing Machine serial number has not been entered?
If the serial number of your DURKOPP ADLER Sewing Machine has not been entered: * Press the OK button. * Contact DA Service.
General| Brand | DURKOPP ADLER |
|---|---|
| Model | 581 |
| Category | Sewing Machine |
| Language | English |
Provides fundamental safety guidelines for machine operation and maintenance.
Comprehensive guide to programming buttonhole characteristics and bartack forms.
Instructions for creating and managing sequences of buttonholes, including adding/deleting.
Configuration of basic machine settings applicable to all programs.
Daily cleaning procedures to ensure optimal machine performance and prevent issues.
Instructions for lubricating machine parts using specified oils for longevity.
Procedures for replacing cutting blocks and blades for optimal cutting performance.
Guidelines for establishing a safe and correct electrical connection to the machine.
Procedures for connecting the machine to a compressed air supply.
To Next Page
