DURKOPP ADLER 867 - Tensioner Lift and NSB Activation

Programming
Service Instructions 867 - 04.0 - 10/2019 109
A+ • Increases parameter
• Changes user level
• Selects subprogram
B+ • Increases parameter
• Changes to next higher category
• Selects subprogram
C+ • Increases parameter
• Selects subprogram
D+ • Increases parameter
• Selects subprogram
OK • Calls parameter or saves it
P • Starts or ends the parameter mode
A- • Decreases parameter
• Changes user level
• Selects subprogram
B- • Decreases parameter
• Changes to next lower category
• Selects subprogram
C- • Decreases parameter
• Selects subprogram
Button Function