DURKOPP ADLER 867 Service Manual

Maintenance
Service Instructions 867 - 04.0 - 10/2019 117
22.2.1 Lubricating the machine head
Fig. 98: Lubricating the machine head
Proper setting
The oil level must not raise above the MAX marking (2) or drop below
the MIN marking (3).
If the oil level falls below the minimum level marking (3), the oil level
indicator lights up in red.
To top off the oil:
1. Fill oil through the oil filler opening (1) up to the MAX marking (2).
2. Turn the machine off, then on again after refilling oil.
 The red light will turn off.
(1) - Oil filler opening
(2) - MAX marking
(3) - MIN marking
①
②
③

DURKOPP ADLER 867 Specifications

General

Stitch Type	Lockstitch
Max Stitch Length	12 mm
Needle System	134-35
Needle Thread Tension	Adjustable
Lubrication	Automatic
Type	Industrial Sewing Machine
Max Sewing Speed	3000 stitches per minute
Presser Foot Lift	20 mm
Power Requirements	230V/50Hz