Maintenance
Service Instructions 867 - 04.0 - 10/2019 113
22 Maintenance
This chapter describes maintenance work that needs to be carried out
on a regular basis to extend the service life of the machine and achieve
the desired seam quality.
Maintenance intervals
WARNING
Risk of injury from sharp parts!
Punctures and cutting possible.
Prior to any maintenance work, switch off the
machine or set the machine to threading mode.
WARNING
Risk of injury from moving parts!
Crushing possible.
Prior to any maintenance work, switch off the
machine or set the machine to threading mode.
Work to be carried out Operating hours
8 40 160 500
Machine head
Removing lint and thread remnants
Check the oil level
Check the hook lubrication
Pneumatic system
Adjusting the operating pressure
Draining the water-oil mixture
Cleaning the filter element
Specific components
Cleaning the motor fan mesh
Checking the toothed belt
To Next Page
Loading...
