Ecotech Acoem Serinus 10 - Page 202

Serinus® 10 User Manual 3.2
Page 202
30
Analog input 5
Cell pressure
31
Analog input 6
Ambient pressure
32
Analog input 7
Raw ADC calibration input
33
Analog input 8
Reserved
34
Analog input 9
Concentration data
35
Analog input 10
Reserved
36
Analog input 11
Reserved
37
Analog input 12
Raw analog to digital count for external analog input 0. 0 - 5 V
= 0 - 32766 A/D counts
38
Analog input 13
Raw analog to digital count for external analog input 1. 0 - 5 V
= 0 - 32766 A/D counts
39
Analog input 14
Raw analog to digital count for external analog input 2. 0 - 5 V
= 0 - 32766 A/D counts
40
Analog input 15
Reserved
41
CO Meas Zero Pot (C)
S30 Measure ZERO coarse adjustment Pot
42
CO Meas Zero Pot (F)
S30 Measure ZERO fine adjustment Pot
43
SO2 Input Pot
SO2 Measure Signal Gain Pot
44
SO2 Ref. Gain Pot
SO2 Reference Signal Gain Pot
45
SO2 Meas. Zero Pot
SO2 Measure zero pot
46
O3 Input Pot
O3 Input signal gain pot
47
Diagnostic Test Pot
The Diagnostic mode adjustment pot for all the analysers
except for S30
48
NOx Input Pot
PMT signal input gain control FOR NOx
49
PGA Gain
1, 2, 4, 8, 16, 32, 64, 128
50
Gas 1 Inst.
Primary gas concentration currently displayed on the front
screen E.g. NO
51
Gas 2 Inst.
Secondary gas concentration currently displayed on front
screen E.g. NOx
52
Gas 3 Inst.
Calculated gas concentration currently displayed on front
screen E.g. NO2
53
Gas 1 Avg.
Average of the readings (for Gas1) of the last n minutes where
n is the averaging period
54
Gas 2 Avg.
Average of the readings (for Gas2) of the last n minutes where
n is the averaging period
55
Gas 3 Avg.
Average of the readings (for Gas3) of the last n minutes where
n is the averaging period
56
Instrument Gain
Current calibration value (default is 1.0)
57
Serial ID
Multidrop or Bayern-Hessen gas id
58
Bayern-Hessen ID
For multigas instruments only