Parts List and Schematics
Ozone generator coefficients
Note that Coeff D is parameter 127
Only valid with an S44 variant set to multiple gains. Shows the
third gas gain (Nx). Default is 1.0.
Only applies to S40 variants.
0 = new PTF calculation
1 = old PTF calculation inherited from ML
This value was added to Build 10800 and defaults to 1.
Only applies to S30 variants, and only on Rev P or later boards.
The current humidity inside the instrument, in percentage.
Only applies to Rev P or later boards.
Optical signal strength.
To Next Page
Loading...
