Ecotech Acoem Serinus 10 - Page 210

Serinus® 10 User Manual 3.2
Page 210
185
Gas 5 Inst.
Calculated gas concentration currently displayed on front
screen E.g. Nx
186
NH3 Conv. Efficiency
187
Cell/Lamp Duty Cycle
188
Mirror T. Duty Cycle
189
Flow Temp Duty Cycle
190
Cooler T. Duty Cycle
191
Conv Temp Duty Cycle
192
CO Conv T Duty Cycle
193
F/Scale Curr AO 0
20 mA Calibration value
194
F/Scale Curr AO 1
195
F/Scale Curr AO 2
196
Z Adj Curr AO 0
4 mA Calibration value
197
Z Adj Curr AO 1
198
Z Adj Curr AO 2
199
Ext Analog Input 0
The value of the external analog input after the multiplier and
offset have been applied
200
Ext Analog Input 1
201
Ext Analog Input 2
202
Conv Set Point
Converter Set Point
203
Cal. Pressure 3
Calibration Pressure 3
204
PTF Correction (gas 3)
Pressure Temperature Flow Compensation Factor for third gas
in multi-gas instruments.
205
Dilution Ratio
The current dilution ratio (default is 1.0)
206
Traffic Light
State of the status light:
0 = Green
1 = Amber
2 = OFF (normally impossible)
3 = Red
207
Network Protocol
0 = EC9800
1 = Bayern-Hessen
2 = Advanced
3 = Modbus
208
Gas 4 Offset
An offset applied to Gas 4
209
O3 Gen. Fine Pot
Ozone generator control, DAC controlled.
DAC: 0..64535
210
O3 Gen. Lamp Current
Units in mA
211
O3 Gen. Coarse Pot
Repeat of parameter 209
212
Logging Period
The data logging period, in seconds (1.. 86400)