Section 5847 User Instructions
Issue AL, July 24, 2006 Spec. Nos. 586505000 and 5865055000 (Model LMS1000)
Page 3-88 Chapter 3. Commands
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Command<6>: HELP
ACK acknowledge report type alarms
ACO list alarms that have been cutoff
AID <n> display configured access identifiers
ALARMS list active alarms
ANSWER show number of rings before the system answers
BATTERY BATTERY type commands
BOARDS list installed boards
BYE logoff and hangup
CHANNELS list user defined channels
CLASS list programmable alarm classifications
CLR list CLR type commands
CMD list programmable commands
COM list local comm port settings
CONFIG <tn> configure specified channel
CONNECT initiate a communications session
with device connected to GATEWAY port
DATE show date and time
DOWNLOAD dump system configuration using XMODEM protocol
DOWNLOAD TFTP dump system configuration using TFTP protocol
EFF show Energy Management status
EVENTS <n> list event log entries for specified user
INFO <n> show information pages
IP display the IP Network variables
LIMITS list channel alarm limits
LOG list alarm log entries
MAIL show any mail
MENU list of commands
MODE display configuration of TL1 port settings
NETWORK list NETWORK type commands
NODE list NODE type commands
OPTIONS list options installed
PERIODS list time periods
PHONE show user phone numbers
POWER <n> list power consumption data
PRCONFIG list channel configuration
PROGRAM list control programs
RATE list size or capacity percentages
REPORT show system alarm reporting parameters
SCAN list active channel status
SEQUENCE show AC & Standby sequencer status
SET list SET type commands
SNMP display the current value of the SNMP options
STATS list channel statistics
STATUS <n> show status page
TIME show date and time
TIMEOUT show user timeout
TRAPS display the SNMP TRAP information
UNIT show unit name and number
UPLOAD configure system by uploading file using XMODEM
UPLOAD TFTP configure system by uploading file using TFTP
USERS <n> list user configuration
VI show Plant Voltage and Load
CLR ACO disable alarm cutoff
CLR EVENTS clear event log
CLR LED <n> turn LED off
To Next Page
Loading...
Need help?
General
