In this product, Gas Density Correction is enabled for all sensors Order ETO 27577 if you would like to
disable Gas Density Correction.
— Added Unremediated Mass Flow and Unremediated Volume flow, which can be assigned to the
Frequency Outputs
— Added Unremediated Mass Flow to the data historian files when APM PG is enabled
— Added new density and flow equation extensions for the CMFS sensors
— Changed the rebooting option on the local display to reboot both the core processor and the Model
5700 transmitter
— Added coil 100 so a user can start-resume or pause a batch with a single coil
March 2019, version 3.0
Document revision 20025166, Rev. AC
Feature additions:
• Net Oil Calculations (NOC) with multi-well functionality is available with purchase of license.
• Manual Mode for APM is available with purchase of a license.
• APM Remediation is available for all output types.
• Gas Linearization function is available with purchase of a license.
• Added Energy Flow calculation
• Added constant batch mode application, a simplified batch screen flow in addition to standard batch
screens. The transmitter remains in constant batch mode until a password is entered to exit mode.
• Added new batch features including preset inventories, batch inhibit, batch end, inhibit batch flow, and
inhibit batch total coils.
• Sensor Simulation and menu enable/disable parameters added to HART.
• Added warning for customers if the core has an ETO installed when upgrading.
• Added additional options for starting and stopping totalizers based on events like reaching a specific total,
or the occurrence of a fault condition.
• Added HART parameters for Installation Verification and Measurement Verification.
• Added additional parameters (device tag, timestamp) to the printer test ticket.
• Added support for Tantalum sensors and Tantalum sensor features.
• New PVs are available for assignment to the mA Output (MAO):
— Calorific Value
— Energy Flow
— Unremediated Mass Flow
— Unremediated Volume Flow
— Unremediated Density
— TRM Liquid Flow
— External Density
Software history (NAMUR recommendation NE53) Configuration and Use Manual
March 2019 MMI-20025166
354 Micro Motion Model 5700 Transmitters with Configurable Outputs
To Next Page
Loading...
