Endress+Hauser Proline Promass E 500 - Page 150

Commissioning Proline Promass E 500 PROFIBUS PA
150 Endress+Hauser
Parameter Prerequisite Description Selection / User
entry
Factory setting
Value 1 display A local display is provided. Select the measured value that
is shown on the local display.
• Mass flow
• Volume flow
• Corrected volume
flow
*
• Density
• Reference density
*
• Temperature
• Current output 1
*
• Current output 2
*
• Current output 4
*
• Pressure
• Totalizer 1
• Totalizer 2
• Totalizer 3
• GSV flow
*
• GSV flow
alternative
*
• NSV flow
*
• NSV flow
alternative
*
• S&W volume flow
*
• Reference density
alternative
*
• Weighted density
average
*
• Weighted
temperature
average
*
• Water cut
*
• Oil density
*
• Water density
*
• Oil mass flow
*
• Water mass flow
*
• Oil volume flow
*
• Water volume
flow
*
• Oil corrected
volume flow
*
• Water corrected
volume flow
*
• Concentration
*
• Target mass flow
*
• Carrier mass flow
*
• Target volume
flow
*
• Carrier volume
flow
*
• Target corrected
volume flow
*
• Carrier corrected
volume flow
*
• HBSI
*
• Exciter current 0
• Oscillation
damping 0
• Oscillation
damping
fluctuation 0
*
• Oscillation
frequency 0
• Frequency
fluctuation 0
*
• Oscillation
amplitude 0
*
• Signal asymmetry
• Electronic
temperature
• Current output 1
*
–