Endress+Hauser Proline Promass E 500 - Operating Philosophy

Operation options Proline Promass E 500 PROFIBUS PA
66 Endress+Hauser
8.2.2 Operating philosophy
The individual parts of the operating menu are assigned to certain user roles (e.g.
operator, maintenance etc.). Each user role contains typical tasks within the device life
cycle.
Menu/parameter User role and tasks Content/meaning
Language Task-
oriented
Role "Operator", "Maintenance"
Tasks during operation:
• Configuration of the operational
display
• Reading measured values
• Defining the operating language
• Defining the Web server operating language
• Resetting and controlling totalizers
Operation • Configuration of the operational display (e.g. display format, display
contrast)
• Resetting and controlling totalizers
Setup "Maintenance" role
Commissioning:
• Configuration of the measurement
• Configuration of the inputs and
outputs
• Configuration of the communication
interface
Wizards for fast commissioning:
• Configuring the system units
• Configuration of the communication interface
• Definition of the medium
• Displaying the I/O configuration
• Configuring the inputs
• Configuring the outputs
• Configuration of the operational display
• Configuring the low flow cut off
• Configuring partial and empty pipe detection
Advanced setup
• For more customized configuration of the measurement (adaptation to
special measuring conditions)
• Configuration of totalizers
• Configuration of WLAN settings
• Administration (define access code, reset measuring device)
Diagnostics "Maintenance" role
Troubleshooting:
• Diagnostics and elimination of process
and device errors
• Measured value simulation
Contains all parameters for error detection and analyzing process and device
errors:
• Diagnostic list
Contains up to 5 currently pending diagnostic messages.
• Event logbook
Contains event messages that have occurred.
• Device information
Contains information for identifying the device
• Measured values
Contains all current measured values.
• Analog inputs
Is used to display the analog input.
• Data logging submenu with the "Extended HistoROM" order option
Storage and visualization of measured values
• Heartbeat Technology
Verification of device functionality on request and documentation of
verification results
• Simulation
Used to simulate measured values or output values.