Endress+Hauser Proline Promass E 500 - Parameter Overview with Brief Description

Proline Promass E 500 PROFIBUS PA Commissioning
Endress+Hauser 109
Temperature unit
→  110
Pressure unit
→  110
Parameter overview with brief description
Parameter Description Selection Factory setting
Mass flow unit Select mass flow unit.
Effect
The selected unit applies to:
• Output
• Low flow cut off
• Simulation process variable
Unit choose list Country-specific:
• kg/h
• lb/min
Mass unit Select mass unit. Unit choose list Country-specific:
• kg
• lb
Volume flow unit Select volume flow unit.
Effect
The selected unit applies to:
• Output
• Low flow cut off
• Simulation process variable
Unit choose list Country-specific:
• l/h
• gal/min (us)
Volume unit Select volume unit. Unit choose list Country-specific:
• l (DN > 150 (6"): m³ option)
• gal (us)
Corrected volume flow unit Select corrected volume flow unit.
Effect
The selected unit applies to:
Corrected volume flow parameter
(→  166)
Unit choose list Country-specific:
• Nl/h
• Sft³/min
Corrected volume unit Select corrected volume unit. Unit choose list Country-specific:
• Nl
• Sft³
Density unit Select density unit.
Effect
The selected unit applies to:
• Output
• Simulation process variable
• Density adjustment (Expert menu)
Unit choose list Country-specific:
• kg/l
• lb/ft³
Reference density unit Select reference density unit. Unit choose list Country-specific
• kg/Nl
• lb/Sft³
Density 2 unit Select second density unit. Unit choose list Country-specific:
• kg/l
• lb/ft³