Endress+Hauser Proline Promass E 500 - Totalizer

Operation Proline Promass E 500 PROFIBUS PA
174 Endress+Hauser
Parameter Prerequisite Description User interface Factory setting
Weighted density average For the following order code:
• "Application package", option
EJ "Petroleum"
• "Application package", option
EM "Petroleum + Locking
function"

The software options
currently enabled are
displayed in the
Software option
overview parameter.
Displays the weighted average
for the density since the last
time the density averages were
reset.
Dependency:
• The unit is taken from:
Density unit parameter
• The value is reset to NaN
(Not a Number) via the
Reset weighted averages
parameter
Signed floating-point
number
–
Weighted temperature average For the following order code:
• "Application package", option
EJ "Petroleum"
• "Application package", option
EM "Petroleum + Locking
function"

The software options
currently enabled are
displayed in the
Software option
overview parameter.
Displays the weighted average
for the temperature since the
last time the temperature
averages were reset.
Dependency:
• The unit is taken from:
Temperature unit
parameter
• The value is reset to NaN
(Not a Number) via the
Reset weighted averages
parameter
Signed floating-point
number
–
11.4.2 Totalizer
The Totalizer submenu contains all the parameters needed to display the current
measured values for every totalizer.
Navigation
"Diagnostics" menu → Measured values → Totalizer
‣
Totalizer
Assign process variable 1 to n
Totalizer 1 to n value
Totalizer 1 to n status
Totalizer 1 to n status (Hex)