Endress+Hauser Proline Promass E 500 - Page 173

Proline Promass E 500 PROFIBUS PA Operation
Endress+Hauser 173
Parameter Prerequisite Description User interface Factory setting
Oil corrected volume flow For the following order code:
• "Application package", option
EJ "Petroleum"
• In the Petroleum mode
parameter, the Net oil &
water cut option is selected.

The software options
currently enabled are
displayed in the
Software option
overview parameter.
Displays the currently
calculated volume flow of the
oil, calculated to values at
reference temperature and
reference pressure.
Dependency:
• Based on the value displayed
in the Water cut parameter
• The unit is taken from:
Corrected volume flow unit
parameter
Signed floating-point
number
–
Oil mass flow For the following order code:
• "Application package", option
EJ "Petroleum"
• In the Petroleum mode
parameter, the Net oil &
water cut option is selected.

The software options
currently enabled are
displayed in the
Software option
overview parameter.
Displays the currently
calculated mass flow of the oil.
Dependency:
• Based on the value displayed
in the Water cut parameter
• The unit is taken from:
Mass flow unit parameter
Signed floating-point
number
–
Water volume flow For the following order code:
• "Application package", option
EJ "Petroleum"
• In the Petroleum mode
parameter, the Net oil &
water cut option is selected.

The software options
currently enabled are
displayed in the
Software option
overview parameter.
Displays the currently
calculated volume flow of the
water.
Dependency:
• Based on the value displayed
in the Water cut parameter
• The unit is taken from:
Volume flow unit
parameter
Signed floating-point
number
–
Water corrected volume flow For the following order code:
• "Application package", option
EJ "Petroleum"
• In the Petroleum mode
parameter, the Net oil &
water cut option is selected.

The software options
currently enabled are
displayed in the
Software option
overview parameter.
Displays the currently
calculated volume flow of the
water, calculated to values at
reference temperature and
reference pressure.
Dependency:
• Based on the value displayed
in the Water cut parameter
• The unit is taken from:
Corrected volume flow unit
parameter
Signed floating-point
number
–
Water mass flow For the following order code:
• "Application package", option
EJ "Petroleum"
• In the Petroleum mode
parameter, the Net oil &
water cut option is selected.

The software options
currently enabled are
displayed in the
Software option
overview parameter.
Displays the currently
calculated mass flow of the
water.
Dependency:
• Based on the value displayed
in the Water cut parameter
• The unit is taken from:
Mass flow unit parameter
Signed floating-point
number
–