Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
Revision G
DISASSEMBLY/ASSEMBLY Disassembly Procedures 117
Confidential
4.2.3.6 Rear Left Housing
Parts/Components need to be removed in advance:
ADF Unit/Scanner Unit/Upper Left Housing/Paper Guide Top Assy/Upper
Housing
Removal procedure
1. Remove the screws (x2) that secure the Rear Left Housing and remove the
Rear Left Housing.
Figure 4-20. Removing the Rear Left Housing
4.2.3.7 Left Housing / Decoration Belt L
Parts/Components need to be removed in advance:
ADF Unit/Scanner Unit/Upper Left Housing/Paper Guide Top Assy/Upper
Housing/Rear Left Housing
Removal procedure
1. Remove the screw (x1) that secures the Decoration Belt and remove the
Decoration Belt from the Left Housing. (See
Fig. 4-21.)
2. Remove the screw (x1) that secures the Left Housing.
Figure 4-21. Removing the Left Housing / Decoration Belt L (1)
The disassembly/reassembly procedures for Artisan 837/710/725/
730/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/
PX730WD/TX730WD differ from those for Artisan 810/835/
PX810FW/TX810FW/PX820FWD/TX820FWD.
See for the procedures.
Artisan 710/725/PX710W/TX710W/PX720WD/TX720WD:
4.3.1.4 Rear Left Housing (p.184)
Artisan 837/PX830FWD:
9.4.2.4 Rear Left Housing (p.297)
Artisan 730/PX730WD/TX730WD:
9.4.2.19 Rear Left Housing (p.313)
When installing the Rear Left Housing, insert the ribs (x2) of the
Rear Left Housing to the inside of the Left Housing. (See
Fig. 4-20.)
Rib
Left Housing
Rear Left Housing
C.B.A. 3x8 (black) (6±1Kgfcm)
Because the parts to remove differ between models, see below for
other than Artisan 810/835/PX810FW/TX810FW/PX820FWD/
TX820FWD.
Artisan 710/725/PX710W/TX710W/PX720WD/TX720WD:
4.3.1.5 Left Housing/Decoration Belt L (p.185)
Artisan 837/730/PX830FWD/PX730WD/TX730WD:
9.4.2.5 Left Housing (p.298)
C.B.A. 3x8 (black) (6±1Kgfcm)
C.B.P. 3x10 (6±1Kgfcm)
Decoration Belt
Left Housing
To Next Page
Loading...
