Epson Artisan 730 - Rear Right FAX Housing

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD Revision G
DISASSEMBLY/ASSEMBLY Disassembly Procedures 120
Confidential
4.2.3.10 Rear Right FAX Housing
 Parts/Components need to be removed in advance:
ADF Unit/Scanner Unit/Upper Left Housing/Paper Guide Top Assy/Upper
Housing/Hinge
 Removal procedure
1. Remove the screws (x3) that secure the Rear Right FAX Housing.
Figure 4-27. Removing the Rear Right FAX Housing (1)
2. Release the ribs (x2) and hook B on the right side, and also release the hook A
in
Fig. 4-27, then remove the Rear Right FAX Housing by lifting it in the
direction of the arrow in Fig. 4-28.
Figure 4-28. Removing the Rear Right FAX Housing (2)
C H E C K
P O I N T
The disassembly/reassembly procedures for Artisan 837/710/725/
730/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/
PX730WD/TX730WD differ from those for Artisan 810/835/
PX810FW/TX810FW/PX820FWD/TX820FWD.
See below for the procedures.
 Artisan 710/725/PX710W/TX710W/PX720WD/TX720WD:
4.3.1.6 Rear Right Housing (p.186)
 Artisan 837/PX830FWD:
9.4.2.6 Rear Right FAX Housing (p.299)
 Artisan 730/PX730WD/TX730WD:
9.4.2.20 Rear Right Housing (p.314)
C.B.A. 3x8 (black) (6±1Kgfcm)
C.B.S. 3x6 (black) (8±1Kgfcm)
C.B.P. 3x10 (6±1Kgfcm)
Hook A
Rear Right FAX Housing
 When installing the Rear Right FAX Housing, insert the ribs
(x2) of the Rear Right FAX Housing to the inside of the Right
Housing. (See
Fig. 4-28.)
 When installing the Rear Right FAX Housing, align the point A
of the Rear Right FAX Housing with the inside of the Base
Frame. (See
Fig. 4-28.)
Rib
Rear Right FAX Housing
Right Housing
Point A
Hook B