Epson Artisan 730 - Lower Paper Guide Waste Ink Pad Assy; Front Paper Guide Waste Ink Pad

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD Revision G
DISASSEMBLY/ASSEMBLY Disassembly Procedures 159
Confidential
4.2.5.12 Lower Paper Guide Waste Ink Pad Assy
 Parts/Components need to be removed in advance:
Cassette Unit
 Removal procedure
1. Release the hooks (x2) and remove the Lower Paper Guide Waste Ink Pad
Assy from the opening at the bottom of the Printer.
Figure 4-110. Removing the Lower Paper Guide Waste Ink Pad Assy
4.2.5.13 Front Paper Guide Waste Ink Pad
 Parts/Components need to be removed in advance:
ADF Unit (Artisan 810/PX810FW/TX810FW only)/Scanner Unit/Upper Left
Housing/Paper Guide Top Assy/Upper Housing/Cassette Unit/Lower Paper Guide
Waste Ink Pad Assy
 Removal procedure
1. Remove the Front Paper Guide Waste Ink Pad with tweezers.
Figure 4-111. Removing the Front Paper Guide Waste Ink Pad
C A U T I O N
Be careful about ink spilling if the printer is tilted in practical
operation.
Align the ribs (x3) of the Lower Paper Guide Waste Ink Pad Assy
with the holes (x3) of the Main Frame, and secure the assy with the
hooks (x2). (See
Fig. 4-110.)
A D J U S T M E N T
R E Q U I R E D
After removing/replacing the Lower Paper Guide Waste Ink Pad
Assy, make the specified adjustments. (See
Chapter 5
"ADJUSTMENT".)
Bottom side
Hook
Rib & hole
Lower Paper Guide
Waste Ink Pad Assy
 Install the Front Paper Guide Waste Ink Pad without any gap.
(See
Fig. 4-111.)
 Insert the Front Paper Guide Waste Ink Pad till the legs (x8) of
Front Paper Guide Waste Ink Pad come out from the Front
Paper Guide.
Figure 4-112. Installing the Front Paper Guide Waste Ink Pad
Front Paper Guide Waste Ink Pad
Legs
Leg of the Front Paper
Guide Waste Ink Pad
Bottom