Epson Artisan 730 - Upper Housing

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD Revision G
DISASSEMBLY/ASSEMBLY Disassembly/reassembly procedures specific to Artisan 710/PX710W/TX710W 182
Confidential
4.3.1.3 Upper Housing
 Parts/Components need to be removed in advance:
Scanner Unit/Upper Left Housing/Paper Guide Top Assy
 Removal procedure
1. Remove the screw (x1) and release the grounding wire.
Figure 4-162. Releasing the Grounding Wire
2. Release the hooks (x5) of the Panel Unit Front Cover. (See Fig. 4-163)
3. While pushing the Panel Lock Button, slide the Panel Upper Cover in the
direction of the arrow to release the hook (x8) of the Panel Upper Cover, and
remove the Panel Upper Cover.
Figure 4-163. Removing the Upper Housing (1)
C H E C K
P O I N T
The disassembly/reassembly procedures for Artisan 810/835/837/
725/730/PX810FW/TX810FW/PX820FWD/TX820FWD/
PX830FWD/PX720WD/TX720WD/PX730WD/TX730WD differ
from those for Artisan 710/PX710W/TX710W. See below for the
procedures.
 Artisan 810/835/PX810FW/TX810FW/PX820FWD/TX820FWD:
4.2.3.5 Upper Housing (p.115)
 Artisan 725/PX720WD/TX720WD:8.3.2.2 Upper Housing (p.266)
 Artisan 837/PX830FWD: 9.4.2.2 Upper Housing (p.294)
 Artisan 730/PX730WD/TX730WD: 9.4.2.17 Upper Housing (p.309)
C A U T I O N
The grounding wire is attached to the frame with a screw. Be
careful not to deform the frame when removing the screw.
C.B.S. 3x6 (8±1Kgfcm)
Grounding
wire
Panel Unit Front Cover
Panel Lock Button
Panel Unit
Panel Upper Cover
Hook of the Panel Upper Cover
Hook of the Panel Unit Front Cover