Epson Artisan 730 - Left Housing

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD Revision G
Artisan 837/730/PX830FWD/PX730WD/TX730WD Disassembly/assembly 298
Confidential
9.4.2.5 Left Housing
 Parts/Components need to be removed in advance:
ADF Unit (Artisan 837/PX830FWD only)/Scanner Unit/Decoration Plate Left
Upper Sub/Paper Guide Top Assy/Upper Housing/Rear Left Housing
 Removal procedure
1. Remove the screws (x2) that secure the Left Housing.
Figure 9-15. Removing the Left Housing (1)
2. Release the hook A (x3) on the bottom, dowel (x1) on the front side of the
Left Housing and hook B (x1) on the front bottom of the Left Housing, and
remove the Left Housing in the direction of the arrow.
Figure 9-16. Removing the Left Housing (2)
C H E C K
P O I N T
This section describes the disassembly/reassembly procedures of the
Left Housing for Artisan 837/730/PX830FWD/PX730WD/
TX730WD.
The procedures are described using Artisan 837/PX830FWD in this
section. Artisan 730/PX730WD/TX730WD can be disassembled/
reassembled in the same procedures, though the shape of some parts
are different.
C.B.A. 3x6 (6±1Kgfcm)
C.B.P. 3x10 (6±1Kgfcm)
Left Housing
C.B.A. 3x8 (6±1Kgfcm)
C.B.P. 3x10 (6±1Kgfcm)
Artisan 837/PX830FWD Artisan 730/PX730WD/TX730WD
C A U T I O N
So as to make description easier, the printer in the photographs is
placed vertically in the following steps. Be careful about ink spilling
if the printer is tilted in practical operation.
Left Housing
Housing Front Left
Positioning hole & dowel
Hook A
Hook B